ASTM A479 UNS S32205 Hex Bolts and Nuts, Fasteners Supplier
Duplex Fasteners
Duplex 2205 Hex Bolts
Alloy 2205 Bolts
2205 Duplex Stainless Steel Nuts
DIN 1.4462 Stud Bolt
Duplex Steel 2205 Threaded Rod
China’s largest Duplex Fasteners manufacturer , stock of 1.4462 Alloy 2205 Stud Bolt according to DIN, ASTM, BS and all International Standards
Table of Content
- Duplex Fasteners Material Specification
- Duplex Steel 2205 Fasteners Price List india
- Stocking Distributors Of Following Types Of Duplex Stainless Steel Fasteners
- Size Chart of Duplex Steel 2205 Screws
- Duplex Steel 2205 Washer Size Chart
- Duplex Steel 2205 Bolts Dimensions
- Duplex Steel Stainless Steel 2205 Nuts Size Chart
- Dimensions of 1.4462 Alloy 2205 Hex Nuts
- Duplex Steel Uns S32205 Socket Head Cap Screw Dimensions
- Duplex Steel 2205 Flat Washer Dimensions
- Table Of Equivalent Grade Of Duplex 2205 Bolts
- Typical Mechanical Property Ranges Of Duplex Stainless Steel Fasteners
- Chemical Resistance Guide Of Duplex Steel 2205 Nuts and Bolts
- Duplex Steel UNS S32205 Fasteners Weight Chart
Duplex 2205 Fasteners are made up of a steel grade that is cost effective, long lasting and corrosion resistant. The grade of steel used for fastener manufacturing can range as ferritic, austenitic or duplex. High Temperature Fasteners Inc. is a leading Duplex Fasteners manufacturer and supplier. The duplex material has the strength qualities of the ferritic steel types and the corrosion resistant qualities of the austenitic steel types.
The Duplex 2205 Bolts belong to the most used of duplex steel grade. These are called standard duplex steel fasteners. The fasteners differ in type as studs, bolts, nuts, screws and many others. The Duplex Stainless Steel Fasteners are used in chemical processing, transport, storage, oil and gas, marine, paper and pulp, liquor and many other industries. The wider application range is possible because of the combination of corrosion resistance, high temperature capabilities with high pressure resistance of the Duplex Steel 2205 Nuts and Bolts.
The standard duplex material is made up of 22% chromium, 4.5% nickel, 3% molybdenum, manganese, silicon, nitrogen, phosphorus, carbon and sulfur in the composition. The Duplex Steel 2205 Screws and other fasteners have up to 97ksi minimum yield strength and up to 131ksi minimum tensile strength. The strength of the Duplex 2205 Hex Bolts is almost double that of the austenitic grade steel bolts. They have higher mechanical properties so that the 1.4462 Alloy 2205 Stud Bolt and other types can come under different specifications such as ASME SA 182, 240, 479, 789 and so on. Please direct your inquiries on any information about the different types such as the Duplex Steel Bolts and screws towards us
Duplex 2205 Bolt
Duplex Hex Bolt
Duplex Nut
Duplex PTFE Coated Washer
Duplex Socket Head Screw
Duplex Stud
Duplex U Bolts
Don’t forget to check PED Approval before buy Duplex Fasteners
|
Specifications
|
ASTM A479 & ASME SA479
|
|
Standard
|
DIN, ASTM, BS and all International Standards
|
|
Length
|
3 mm to 200 mm
|
|
Nuts Size
|
M3 – M56 | 3/6″ to 2″ | Custom Sizes
|
|
ASTM A182 F51 UNS S31803 Bolts / Screw Size
|
M3 – M56 | 3/6″ to 2″ | Custom Sizes
|
|
Standard
|
DIN, UNI, ISO, JIS, GB, IS, BS, ASME, ANSI, ASTM and all International Standards
|
|
ASTM A182 F60 UNS S32205 Bolts, Studs Threads:
|
METRIC, BSW, BSF, UNC, UNF or as required
|
|
In Form of
|
Hex, Square, Round, Threading as per Gauge Etc.
|
|
Head drive
|
Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
|
|
Bolts Size
|
M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M20, M24, M30, M36 to M160
|
|
Machine Screws Size
|
M1.6 – M12
|
|
Washers Size
|
M3 – M56 | 3/6″ to 2″ | Custom Sizes
|
|
Test Certificate:
|
Manufacturer Test Certificate as per EN 10204 / 3.1
|
|
Source of raw materials
|
Tata Steel, JSPL, RINL, Usha Martin, Dhamm Steel, Mukund Steel etc.
|
|
Scope Of Manufacture
|
|
|
Duplex Steel Grades
|
Duplex Steel UNS S32205
|
|
Packing
|
IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
|
Production process
|
M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element |
|
Duplex 2205 Fasteners Standard:
|
ANSI – American National Standards Institute
DIN: DIN 931, DIN 933, DIN 934, DIN 970 UTS – Unified Thread Standard : UNC, UNF, UNEF, UNS, NPT, NPTF ISO – International Organization for Standardization : ISO 4032, ISO 4033, JIS standards |
|
Fasteners Type
|
Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw,Nut, Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw, Hex Set Screw
|
Duplex 2205 Bolts Utilization
Our Duplex 2205 Bolts Are Installed in corrosive environment
|
Duplex Stainless Steel Fasteners type
|
Duplex Stainless Steel Fasteners Price in China
|
Duplex Stainless Steel Fasteners Price in USD
|
Duplex Stainless Steel Fasteners Price Per Unit in UAE Dirham
|
|---|---|---|---|
|
Duplex Stainless Steel Hex Nut Price with Stud Bolt (M16 X 150MM)
|
INR 500 Per Unit
|
USD $ 7.21 Per Unit
|
AED 26.47 UAE Dirham
|
|
Duplex Stainless Steel Bolt Price in China (SET M12X 25)
|
INR 150 Per Unit
|
USD $ 2.16 Per Unit
|
AED 7.94 UAE Dirham
|
|
Duplex Stainless Steel Stud Bolt Price with Hex Nut (M16 X 150MM)
|
INR 500 Per Unit
|
USD $ 7.21 Per Unit
|
AED 26.47 UAE Dirham
|
DIN 1.4462 Anchor Bolts
Duplex Steel UNS S32205 Square Nuts
2205 Duplex Steel Hex Head Nuts
ASTM A479 Duplex Steel UNS S32205 Hex Nuts
ASME SF60 2205 Duplex Steel Tie Rods
SA479 2205 Duplex Steel Tie Bars
SAF 2205® Square Washers
Duplex Steel UNS S32205 Spring Washers
ASME SA479 2205 Eye Nuts
SA479 2205 Duplex Steel Heavy Hex Nuts
Duplex Steel F60 Lock Nut
Duplex Steel S32205 Self Locking Nuts
Duplex Steel UNS S32205 Carriage Bolts
Duplex Steel F60 Allen Cap Bolt
DIN 1.4462 Duplex Countersunk Bolts
Duplex Steel F60 Flange Bolts
Duplex UNS S32205 Square Bolts
2205 Duplex Steel Hex Head Bolts
ASME SA479 Duplex Steel UNS S32205 U Bolts
2205 Duplex Eye Bolts
DIN 1.4462 Duplex Steel Lock Washers
ASME SA479 2205 Spherical Washers
SAF 2205® Ogee Washers
Duplex Steel Stainless Steel 2205 Split Washers
Grade 2205 Duplex Steel Self Drilling Screw
Duplex Steel 2205 Set Screw
Duplex Steel 2205 Wood Screw
Duplex Steel 2205 Coach Screw
ASME SA479 2205 Dome Nuts
ASTM A479 Duplex Steel F60 Acorn Nuts
Duplex Steel UNS S32205 T Nuts
Duplex Steel F60 Wheel Nuts
Duplex Steel UNS S32205 Heavy Hex Bolts
Duplex Steel UNS S32205 Hex Bolts
2205 Duplex Steel Lag Bolts
Duplex Steel 2205 T Bolts
ASTM A479 2205 Duplex Steel Eye Screw
Duplex Steel UNS S32205 Concrete Screw
Duplex Steel UNS S32205 Thumb Screw
SAF 2205® Deck Screw
2205 Duplex Steel Socket Head Cap Screw
Grade 2205 Duplex Steel Wing Screw
DIN 1.4462 Duplex Steel Roofing Screw
Duplex Steel Grade 2205 Self Tapping Screw
Duplex Steel 2205 Flat Washers
EN 1.4462 Duplex Steel Star Washers
SAF 2205® Dock Washers
DIN 1.4462 Duplex Steel Lag Screw
SAF 2205® Serrated Flange Nuts
2205 Duplex Steel Threaded Rod
ASTM A479 S32205 Stud Bolts
SAF 2205® Double Ended Studs
SAF 2205® Nylon Insert Nuts
SA479 Duplex Steel UNS S32205 Wing Nuts
Duplex Steel F60 Panel Nuts
UNS S32205 Coupling Nuts
|
Size
|
USS
|
SAE | ||||
|---|---|---|---|---|---|---|
|
Inside Diameter
(A) |
Outside Diameter
(B) |
Thickness
(C) |
Inside Diameter
(A) |
Outside Diameter
(B) |
Thickness
(C) |
|
|
#2
|
|
|
|
3/32″
|
1/4″
|
0.020″
|
|
#4
|
|
|
|
1/8″
|
5/16″
|
0.032″
|
|
#6
|
|
|
|
5/32″
|
3/8″
|
0.049″
|
|
#8
|
|
|
|
3/16″
|
7/16″
|
0.049″
|
|
#10
|
|
|
|
7/32″
|
1/2″
|
0.049″
|
|
#12
|
|
|
|
1/4″
|
9/16″
|
0.065″
|
|
1/4″
|
5/16″
|
0.734″
|
0.065″
|
9/32″
|
5/8″
|
0.065″
|
|
5/16″
|
3/8″
|
7/8″
|
0.083″
|
11/32″
|
11/16″
|
0.065″
|
|
3/8″
|
7/16″
|
1″
|
0.083″
|
13/32″
|
13/16″
|
0.065″
|
|
7/16″
|
1/2″
|
1-1/4″
|
0.083″
|
15/32″
|
15/16″
|
0.065″
|
|
1/2″
|
9/16″
|
1-3/8″
|
0.109″
|
17/32″
|
1-1/16″
|
0.095″
|
|
9/16″
|
5/8″
|
1-15/32″
|
0.109″
|
19/32″
|
1-5/32″
|
0.095″
|
|
5/8″
|
11/16″
|
1-3/4″
|
0.134″
|
21/32″
|
1-5/16″
|
0.095″
|
|
3/4″
|
13/16″
|
2″
|
0.148″
|
13/16″
|
1-15/32″
|
0.134″
|
|
7/8″
|
15/16″
|
2-1/4″
|
0.165″
|
15/16″
|
1-3/4″
|
0.134″
|
|
1″
|
1-1/16″
|
2-1/2″
|
0.165″
|
1-1/16″
|
2″
|
0.134″
|
|
1-1/8″
|
1-1/4″
|
2-3/4″
|
0.165″
|
|||
|
1-1/4″
|
1-3/8″
|
3″
|
0.165″
|
|||
|
1-3/8″
|
1-1/2″
|
3-1/4″
|
0.180″
|
|||
|
1-1/2″
|
1-5/8″
|
3-1/2″
|
0.180″
|
|||
|
1-5/8″
|
1-3/4″
|
3-3/4″
|
0.180″
|
|||
|
1-3/4″
|
1-7/8″
|
4″
|
0.180″
|
|||
|
2″
|
2-1/8″
|
4-1/2″
|
0.213″
|
|||
|
NOMINAL SIZE (D)
|
BODY DIAMETER
|
|
HEAD THICKNEASTM A479
|
|
ACROASTM A479 THE FLATS
|
|
ACROASTM A479 CORNERS
|
|
|---|---|---|---|---|---|---|---|---|
|
|
D (MAX)
|
D (MIN)
|
H (MAX)
|
H (MIN)
|
F (MAX)
|
F (MIN)
|
C (MAX)
|
C (MIN)
|
|
m10
|
10.00
|
9.78
|
6.63
|
6.17
|
17.00
|
15.73
|
18.48
|
17.77
|
|
m12
|
12.00
|
11.73
|
7.76
|
4.24
|
19.00
|
17.73
|
20.78
|
20.03
|
|
m14
|
14.00
|
13.73
|
9.09
|
8.51
|
22.00
|
20.67
|
24.25
|
23.35
|
|
m16
|
16.00
|
15.73
|
10.32
|
9.68
|
24.00
|
23.67
|
27.71
|
26.75
|
|
m20
|
20.00
|
19.67
|
12.88
|
12.12
|
30.00
|
29.16
|
34.64
|
32.95
|
|
m24
|
24.00
|
23.67
|
15.44
|
14.56
|
36.00
|
35.00
|
41.57
|
39.55
|
|
m30
|
30.00
|
29.67
|
19.48
|
17.92
|
46.00
|
45.00
|
53.12
|
50.85
|
|
m36
|
36.00
|
35.61
|
23.38
|
21.63
|
55.00
|
53.80
|
63.51
|
60.79
|
|
m42
|
42.00
|
41.38
|
26.97
|
25.03
|
65.00
|
62.90
|
75.06
|
71.71
|
|
m48
|
48.00
|
47.38
|
31.07
|
28.93
|
75.00
|
72.60
|
86.60
|
82.76
|
|
m56
|
56.00
|
55.26
|
36.2
|
33.80
|
85.00
|
82.20
|
98.15
|
93.71
|
|
m64
|
64.00
|
63.26
|
41.32
|
38.68
|
95.00
|
91.80
|
109.70
|
104.65
|
|
m72
|
72.00
|
71.26
|
46.45
|
43.55
|
105.00
|
101.40
|
121.24
|
115.60
|
|
m80
|
80.00
|
79.26
|
51.58
|
48.42
|
115.00
|
111.00
|
132.72
|
126.54
|
|
m90
|
90.00
|
89.13
|
57.74
|
54.26
|
130.00
|
125.50
|
150.11
|
143.07
|
|
m100
|
90.00
|
99.13
|
63.9
|
60.10
|
145.00
|
140.00
|
167.43
|
159.60
|
|
Nut Size
(mm) |
Diameter*
(mm) |
Height
(mm) |
||
|---|---|---|---|---|
|
Hex Nut
|
Jam Nut
|
Nylock Nut
|
||
|
2
|
4
|
1.6
|
1.2
|
|
|
2.5
|
5
|
2
|
1.6
|
|
|
3
|
5.5
|
2.4
|
1.8
|
4
|
|
4
|
7
|
3.2
|
2.2
|
5
|
|
5
|
8
|
4
|
2.7
|
5
|
|
6
|
10
|
5
|
3.2
|
6
|
|
7
|
11
|
5.5
|
3.5
|
|
|
8
|
13
|
6.5
|
4
|
8
|
|
10
|
17
|
8
|
5
|
10
|
|
12
|
19
|
10
|
6
|
12
|
|
14
|
22
|
11
|
7
|
14
|
|
16
|
24
|
13
|
8
|
16
|
|
18
|
27
|
15
|
9
|
18.5
|
|
20
|
30
|
16
|
10
|
20
|
|
* This is the diameter across the flats. It is also the size of wrench to use.
|
||||
Select your size in our online inventory of Duplex Steel 2205 Screws in various head include pan/cheese/countersunk phillipse/socket head
|
Nominal Size or Basic Major Thread Diameter
|
F
|
G
|
H
|
||||||
|
Width
Across Flats |
Width
Across Corners |
Thickness
|
|||||||
|
Basic
|
Max
|
Min
|
Max
|
Min
|
Basic
|
Max
|
Min
|
||
|
1/4
|
.2500
|
7/16
|
.438
|
.428
|
.505
|
.488
|
7/32
|
.226
|
.212
|
|
5/16
|
.3125
|
1/2
|
.500
|
.489
|
.577
|
.557
|
17/64
|
.273
|
.258
|
|
3/8
|
.3750
|
9/16
|
.562
|
.551
|
.650
|
.628
|
21/64
|
.337
|
.479
|
|
7/16
|
.4375
|
11/16
|
.688
|
.675
|
.794
|
.768
|
3/8
|
.385
|
.365
|
|
1/2
|
.5000
|
3/4
|
.750
|
.736
|
.866
|
.840
|
7/16
|
.448
|
.427
|
|
9/16
|
.5625
|
7/8
|
.875
|
.861
|
1.010
|
.982
|
31/64
|
.496
|
.473
|
|
5/8
|
.6250
|
15/16
|
.938
|
.922
|
1.083
|
1.051
|
35/64
|
.559
|
.535
|
|
3/4
|
.7500
|
1-1/8
|
1.125
|
1.088
|
1.299
|
1.240
|
41/64
|
.665
|
.617
|
|
7/8
|
.8750
|
1-5/16
|
1.312
|
1.269
|
1.516
|
1.447
|
3/4
|
.776
|
.724
|
|
1
|
1.0000
|
1-1/2
|
1.500
|
1.450
|
1.732
|
1.653
|
55/64
|
.887
|
.831
|
|
1-1/8
|
1.1250
|
1-11/16
|
1.688
|
1.631
|
1.949
|
1.859
|
31/32
|
.999
|
.939
|
|
1-3/8
|
1.3750
|
2-1/16
|
2.062
|
1.994
|
2.382
|
2.273
|
1-11/64
|
1.206
|
1.138
|
|
1-1/2
|
1.500
|
2-1/4
|
2.250
|
2.175
|
2.598
|
2.480
|
1-9/32
|
1.ASTM A194 GR. 8
|
1.245
|
|
1-5/8
|
1.6250
|
2-7/16
|
2.438
|
2.356
|
2.815
|
2.686
|
1-25/64
|
1.429
|
1.353
|
|
1-3/4
|
1.7500
|
2-5/8
|
2.625
|
2.538
|
3.031
|
2.893
|
1-1/2
|
1.540
|
1.460
|
|
2
|
2.0000
|
3
|
3.000
|
2.900
|
3.464
|
3.306
|
1-23/32
|
1.763
|
1.675
|
|
2-1/4
|
2.2500
|
3-3/8
|
3.375
|
3.263
|
3.897
|
3.719
|
1-15/16
|
1.986
|
1.890
|
|
2-1/2
|
2.5000
|
3-3/4
|
3.750
|
3.625
|
4.330
|
4.133
|
2-5/32
|
2.209
|
2.105
|
|
2-3/4
|
2.7500
|
4-1/8
|
4.125
|
3.988
|
4.763
|
4.546
|
2-3/8
|
2.431
|
2.319
|
|
Nominal
|
Thread.
|
Hex Socket Size
|
Body diameter and Head height
|
Head Dia
|
Soc. length
|
||
|
Size
|
Pitch
|
Max
|
Min
|
Max
|
Min
|
||
|
J
|
D /H
|
A
|
K
|
||||
|
M3
|
0.5
|
2.50
|
3.00
|
2.86
|
5.50
|
5.20
|
1.3
|
|
M4
|
0.70
|
3.00
|
4.00
|
3.82
|
7.00
|
6.64
|
2.00
|
|
M5
|
0.8
|
4.00
|
5.00
|
4.82
|
8.50
|
8.14
|
2.70
|
|
M6
|
1.0
|
5.00
|
6.00
|
5.82
|
10.00
|
9.64
|
3.30
|
|
M8
|
1.25
|
6.00
|
8.00
|
7.78
|
13.00
|
12.57
|
4.3
|
|
M10
|
1.5
|
8.00
|
10.00
|
9.78
|
16.00
|
15.57
|
5.50
|
|
M12
|
1.75
|
10.00
|
12.00
|
11.73
|
18.00
|
17.57
|
6.60
|
|
M16
|
2.0
|
14.00
|
16.00
|
15.73
|
24.00
|
23.48
|
8.80
|
|
M20
|
2.5
|
17.00
|
20.00
|
19.67
|
30.00
|
29.48
|
10.70
|
|
M24
|
3.0
|
19.00
|
24.00
|
23.67
|
36.00
|
35.38
|
12.90
|
|
Bolt Size
|
USS
|
SAE
|
||||
|
OD (in.)
|
ID (in.)
|
Thickness
|
OD (in.)
|
ID (in.)
|
Thickness
|
|
|
1/8 (#6)
|
–
|
–
|
–
|
0.375
|
0.156
|
.036/.065
|
|
5/32 (#8)
|
–
|
–
|
–
|
0.438
|
0.188
|
.036/.065
|
|
3/16 (#10)
|
0.560
|
0.250
|
.036/.065
|
0.500
|
0.220
|
.036/.065
|
|
7/32 (#12)
|
–
|
–
|
–
|
0.562
|
0.250
|
.051/.080
|
|
1/4 (#14)
|
0.734
|
0.312
|
.051/.080
|
0.625
|
0.281
|
.051/.080
|
|
5/16
|
0.875
|
0.375
|
.064/.104
|
0.688
|
0.344
|
.051/.080
|
|
3/8
|
1.000
|
0.438
|
.064/.104
|
0.812
|
0.406
|
.051/.080
|
|
7/16
|
1.250
|
0.500
|
.064/.104
|
0.922
|
0.469
|
.051/.080
|
|
1/2
|
1.375
|
0.562
|
.086/.132
|
1.062
|
0.531
|
.074/.121
|
|
9/16
|
1.469
|
0.625
|
.086/.132
|
1.156
|
0.594
|
.074/.121
|
|
5/8
|
1.750
|
0.688
|
.108/.160
|
1.312
|
0.656
|
.074/.121
|
|
3/4
|
2.000
|
0.812
|
.122/.177
|
1.469
|
0.812
|
.108/.160
|
|
7/8
|
2.250
|
0.938
|
.136/.192
|
1.750
|
0.938
|
.108/.160
|
|
1
|
2.500
|
1.062
|
.136/.192
|
2.000
|
1.062
|
.108/.160
|
|
1 1/8
|
2.750
|
1.250
|
.136/.192
|
2.250
|
1.250
|
.108/.160
|
|
1 1/4
|
3.000
|
1.375
|
.136/.192
|
2.500
|
1.375
|
.136/.192
|
|
1 3/8
|
3.250
|
1.500
|
.153/.213
|
2.750
|
1.500
|
.136/.213
|
|
1 1/2
|
3.500
|
1.625
|
.153/.213
|
3.000
|
1.625
|
.153/.213
|
|
1 5/8
|
3.750
|
1.750
|
.153/.213
|
–
|
–
|
–
|
|
1 3/4
|
4.000
|
1.875
|
.153/.213
|
–
|
–
|
–
|
|
1 7/8
|
4.250
|
2.000
|
.153/.213
|
–
|
–
|
–
|
|
2
|
4.500
|
2.125
|
.153/.213
|
–
|
–
|
–
|
|
2 1/4
|
4.750
|
2.375
|
.320/.248
|
–
|
–
|
–
|
|
2 1/2
|
5.000
|
2.625
|
.210/.280
|
–
|
–
|
–
|
|
2 3/4
|
5.250
|
2.875
|
.228/.410S
|
–
|
–
|
–
|
|
3
|
5.500
|
3.125
|
.249/.327
|
–
|
–
|
–
|
Best Price Guarantee with Mill Test Report of duplex 2205 threaded rod, as per drawing and customers specification
|
Duplex
|
Common Name
|
Related Specifications
|
||
|---|---|---|---|---|
|
|
|
European DIN
|
UNS
|
ASTM/ASME
|
|
Duplex Steel S31803/S32205
|
SAF 2205®
|
1.4462
|
S31803/S32205
|
F51/F60
|
buy from duplex nut bolts manufacturer in india, Refer Hex, Square, Round form Duplex 2205 Bolts dimensions, Specifications and Price List
|
S31803 / S32205
|
Density
|
Melting Point
|
Yield Strength (0.2%Offset)
|
Tensile Strength
|
Elongation
|
|
7.8 g/cm3
|
1350 °C (2460 °F)
|
Psi – 80000 , MPa – 550
|
Psi – 116000 , MPa – 800
|
15 %
|
|
Grade
|
C
|
Mn
|
Si
|
P
|
S
|
Cr
|
Mo
|
Ni
|
N
|
Fe
|
|
S31803
|
0.030 max
|
2.00 max
|
1.00 max
|
0.030 max
|
0.020 max
|
22.0 – 23.0
|
3.0 – 3.5
|
4.50 – 6.50
|
0.14 – 0.20
|
63.72 min
|
|
S32205
|
0.030 max
|
2.00 max
|
1.00 max
|
0.030 max
|
0.020 max
|
21.0 – 23.0
|
2.50 – 3.50
|
4.50 – 6.50
|
0.8 – 0.20
|
63.54 min
|
| WEIGHTS MACHINE SCREWS & Type 1, 23, F and G TAPPING SCREWS LBS. Per 1000 pieces |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
DIAMETERS
|
|||||||||||
|
LENGTHS
|
#2
|
#3
|
#4
|
#5
|
#6
|
#8
|
#10
|
#12
|
1/4″
|
5/16″
|
3/8″
|
|
1/8
|
0.40
|
0.55
|
0.70
|
1.1
|
1.4
|
—
|
—
|
—
|
—
|
—
|
—
|
|
3/16
|
0.50
|
0.70
|
0.90
|
1.2
|
1.5
|
2.5
|
3.9
|
—
|
—
|
—
|
—
|
|
1/4
|
0.60
|
0.80
|
1.00
|
1.4
|
1.7
|
2.8
|
4.3
|
5.6
|
8.5
|
—
|
—
|
|
5/16
|
0.60
|
0.90
|
1.20
|
1.5
|
1.9
|
3.1
|
4.6
|
6.1
|
9.1
|
16.7
|
—
|
|
3/8
|
0.70
|
0.90
|
1.30
|
1.7
|
2.1
|
3.4
|
5.0
|
6.5
|
9.8
|
17.7
|
29.2
|
|
7/16
|
0.80
|
1.00
|
1.50
|
1.9
|
2.2
|
3.6
|
5.4
|
6.9
|
10.4
|
18.8
|
30.7
|
|
1/2
|
0.80
|
1.10
|
1.60
|
2.0
|
2.4
|
3.9
|
5.8
|
7.4
|
11.1
|
19.8
|
32.2
|
|
9/16
|
0.90
|
1.20
|
1.70
|
2.2
|
2.6
|
4.2
|
6.2
|
7.8
|
11.7
|
20.9
|
33.6
|
|
5/8
|
1.00
|
1.30
|
1.80
|
2.3
|
2.8
|
4.5
|
6.6
|
8.3
|
12.4
|
21.9
|
35.1
|
|
3/4
|
1.10
|
1.50
|
2.10
|
2.6
|
3.2
|
5.0
|
7.3
|
9.2
|
13.6
|
24.0
|
38.0
|
|
7/8
|
1.30
|
1.70
|
2.30
|
3.0
|
3.5
|
5.6
|
8.1
|
10.1
|
14.9
|
26.1
|
41.0
|
|
1″
|
1.40
|
1.90
|
2.50
|
3.4
|
3.9
|
6.2
|
8.9
|
11.0
|
16.1
|
28.8
|
44.0
|
|
1-1/8″
|
1.50
|
2.00
|
2.80
|
3.8
|
4.3
|
6.7
|
9.6
|
11.9
|
17.4
|
30.2
|
47.0
|
|
1-1/4″
|
1.60
|
2.20
|
3.00
|
4.1
|
4.6
|
7.3
|
10.4
|
12.8
|
18.7
|
32.3
|
49.8
|
|
1-1/2″
|
1.80
|
2.50
|
3.50
|
4.7
|
5.3
|
8.3
|
11.9
|
14.7
|
21.2
|
36.5
|
55.8
|
|
1-3/4″
|
2.10
|
2.90
|
4.00
|
5.3
|
6.1
|
9.4
|
13.5
|
16.5
|
23.7
|
40.7
|
61.7
|
|
2″
|
2.40
|
3.30
|
4.50
|
6.0
|
6.8
|
10.6
|
15.0
|
18.3
|
26.2
|
44.8
|
67.6
|
|
2-1/4″
|
2.60
|
3.60
|
5.00
|
6.7
|
7.6
|
11.8
|
16.6
|
20.1
|
28.8
|
19.0
|
73.5
|
|
2-1/2″
|
2.80
|
3.90
|
5.50
|
7.3
|
8.3
|
12.9
|
18.1
|
22.0
|
31.3
|
53.2
|
79.5
|
|
2-3/4″
|
3.10
|
4.30
|
6.00
|
7.9
|
9.1
|
13.9
|
19.7
|
23.8
|
33.9
|
57.3
|
85.3
|
|
3″
|
3.40
|
4.70
|
6.50
|
8.6
|
9.8
|
15.0
|
21.2
|
25.6
|
36.4
|
61.5
|
91.3
|
|
* Weights above are approximate and are based on pan head machine screws
|
|||||||||||