The major alloying elements of 6061 T6 Aluminum Round Bar includes about 1.0% magnesium in addition to 0.6% silicon. This alloying in the chemistry of the 6061-t6 aluminium rod is what makes the rod highly resistant to corrosion and stress cracking as well.
Check aluminium 6061 t6 price in China, trusted 6061-t6 aluminum rod, 6061-t6 aluminum flat bar suppliers China.
6061 T6 Aluminum Round Bar
6061-t6 Rod
6061-t6 aluminum flat bar
We maintain stock of 6061-t6 aluminum rectangular bar, 6061 t6 aluminum bar, 6061-t6 aluminum t-bar
Moreover, the 6061-t6 aluminium flat bar exhibits good formability and weldability characteristics. One of the most commonly used alloys among the other aluminium grades, the 6061-t6 aluminium rectangular bar is highly regarded as the most versatile of them all. Apart from its corrosion resistance properties, the ASME SB 211 AA6061-T651 Threaded Rods are known for its strength, workability, along with ease of joining.
The aforementioned characteristics of the UNS A96061 Aluminium T6 Hexagon Bars make them well suited to be used across a wide variety of applications in the different industrial sector. This being said, it has been noted that the machinability of grade AL6061 T6 Cold Drawn Bars is not as strong as those aluminium alloys belonging to the 2000 series. If the alloy has been extruded, the AL 6061 T6 Square Bars are easily cut, welded, as well as machined.
These extruded ASTM B211 Aluminium 6061 T6 Black Bars could be used for several demanding applications. In particular, those applications where the primary requirement of the DIN 3.1255 / 3.1254 Aluminium 6061 Rods includes high strength to weight ratio and resistance to corrosion.
|
Solution Temperature
|
529 °C
|
985 °F
|
|
|
Aging Temperature
|
160 °C
|
320 °F
|
Rolled or drawn products; hold at temperature for 18 hr
|
|
Aging Temperature
|
177 °C
|
350 °F
|
Extrusions or forgings; hold at temperature for 8 hr
|
| Element | % Present |
| Si | 0.40 – 0.80 |
| Fe | 0.70 max |
| Cu | 0.15-0.40 |
| Zn | 0.25 max |
| Mn | 0.15 |
| Mg | 0.8-1.2 |
| Ti | 0.15 max |
| Cr | 0.04-0.35 |
| Al | Balance |
| Others (Total) | 0.15 max |
| Other (Each) | 0.05 max |
| Physical Property | Value |
| Density | 2,70 g/cm³ |
| Melting Point | 582 °C |
| Thermal Expansion | 23.4 x 10^-6 /K |
| Modulus of Elasticity | 69 GPa |
| Thermal Conductivity | 170 W/m.K |
| Electrical Resistivity | %43 IACS |
Most reliable supplier of ASME SB 211 AA6061-T651 Threaded Rods, UNS A96061 Aluminium T6 Hexagon Bars, AL6061 T6 Cold Drawn Bars
| STANDARD | WERKSTOFF NR. | UNS |
| Aluminium 6061 T6 | – | A96061 |
Mail us for the best price of ASTM B211 Aluminium 6061 T6 Black Bars, DIN 3.1255 / 3.1254 Aluminium 6061 Rods, AA6061-T6 Bright Bars, 6061A Aluminum T6 Spring Steel Bars
- Dimensions : ASTM, ASME, AMS
- Specifications : ASTM B211, AMS 4115, 4116, 4117, 4128, AMS-QQ-A-225/8 & ASTM B221, AMS4150, 4160, 4161, AMS-QQ-A-200/8
- Alloy : 6061 – T6
- Size : 1/4” Dia – 16” Dia
- Form : Square , Round , Hex , Flat, Wire In Black & Bright Finish
- Length : Random, Fix & Cut Length
- Finish : Bright, Polish & Black
Order custom sizes AL 6061 T6 Square Bars, Aluminium 6061 T6 Flat Bars, Aluminium Alloy 6061 (6061 A) T6 Round Bars, 6061A T651 Welding Rods online
|
CTE, linear 68°F
|
23.6 µm/m-°C
|
13.1 µin/in-°F
|
AA; Typical; Average over 68-212°F range.
|
|
CTE, linear 250°C
|
25.2 µm/m-°C
|
14 µin/in-°F
|
Estimated from trends in similar Al alloys. 20-300°C.
|
|
Specific Heat Capacity
|
0.896 J/g-°C
|
0.214 BTU/lb-°F
|
|
|
Thermal Conductivity
|
167 W/m-K
|
1160 BTU-in/hr-ft²-°F
|
AA; Typical at 77°F
|
|
Melting Point
|
582 – 652 °C
|
1080 – 1205 °F
|
AA; Typical range based on typical composition for wrought products 1/4 inch thickness or greater; Eutectic melting can be completely eliminated by homogenization.
|
|
Solidus
|
582 °C
|
1080 °F
|
AA; Typical
|
|
Liquidus
|
652 °C
|
1205 °F
|
AA; Typical
|
|
Electrical Resistivity
|
3.99e-006 ohm-cm
|
3.99e-006 ohm-cm
|
AA; Typical at 68°
|
|
|