most dedicated ASTM B473 UNS N08020 Rod and Hex bar Suppliers in Shenzhen, China
buy large or small quantity Nickel Alloy 20 Threaded Rod , DIN 2.4660 Flat/ Square Bar at discounted prices
Components produced under specification ASTM B473, including nickel based alloy 20 must be furnished in any of the following conditions i.e. – solution-annealed condition, stabilized-annealed condition, or annealed condition. The specification requires that the material used to produce the ASTM B473 UNS N08020 Rod is to conform to a certain set of requirements.
In addition to the chemical composition prescribe, the Nickel Alloy 20 Threaded Rod is also to adhere to the specified requirements pertaining to the mechanical properties prescribed as well. The specification also makes provisions for the performance of both a chemical analysis and a tension test to be subjected to the Alloy 20 Round Bar. An austenitic stainless steel grade, the most attractive feature of this alloy is perhaps its resistance to sulfuric acid.
The use of sulfuric acid is common in several industries for the processing of raw materials. Hence, the DIN 2.4660 Hex bar is a common denominator applicable in industries such as petrochemical, power generation, chemical, as well as the plastics industry. While the resistance of this alloy against corrosion from pitting and chloride ion exceeds that of grade 304, the same feature of the Alloy 20 Flat Bar rivals stainless steel grade 316 or marine grade alloy.
Alloy 20 Round Bar
ASTM B473 UNS N08020 Rod
DIN 2.4660 Flat Bar
Table of Content
| Grade | Alloy 20 |
|---|---|
| Specification | ASTM B473/ASME SB473 ASTM B462, ASTM B472 /ASME SB472 |
| Hex Bar | 2 milimeter to 100 milimeter A/F |
| Flat bar | 2 milimeter to 100 milimeter Thickness |
| 10 milimeter to 500 milimeter Width | |
| Channel Bar | section; 5 to 6 thick, 80 x 40mm to 150 x 75mm |
| Round bar | Diameter: 3-~800mm |
| Square bar | 4 to 100mm |
| Section | 3 to 12 mm thick. |
| Rectangles | 33 x 30 to 295 x 1066 |
| Billet | 1/2″ to 495 Dia. |
| Angle bar | 3*20*20~12*100*100 mm |
| Hollow Bar | 32mm Outside Diameter x 16mm Inside Diameter to 250mm Outside Diameter x 200mm Inside Diameter |
| Form | Flat Bar, Hollow, Round, Square, Triangle, Rectangle, I/H Bar, Half Round Bar, Rod, T-Bar, Precision Ground Bar, Hex (A/F), Blocks, Channel Bar, Billet, Threaded, Round Rod, Profiles, Ingot, Rings, Forging etc. |
| Technique | Hot Rolled, Cold Drawn, Rod, Forged Round Bar, Cold Rolled |
| Condition | annealed, Hardened & tempered |
| Surface | Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Polished, Hairline |
Alloy 20 Round Bar Surface finish
|
RT
|
Rough turned/peeled
|
P&T
|
Peeled and turned
|
|
SRE
|
Slit rolled edge
|
BD
|
Bright drawn
|
|
P
|
Polished
|
CD
|
Cold drawn
|
|
HRAP
|
Hot rolled annealed and pickled
|
CF
|
Cold finished
|
|
HF
|
Hot finished
|
CG
|
Centreless ground
|
|
PR
|
Peeled and reeled
|
ST
|
Smooth turned
|
Alloy 20 Rod Condition
|
ANN
|
Annealed
|
|
H&T
|
Hardened and tempered.
|
|
PH
|
Precipitation hardened.
|
| Alloy 20 Round Bar Price in China | Quantity | PRICE |
|---|---|---|
|
10 (A/F) x 1000mm Length
|
1
|
$101.16
|
|
10 (A/F) x 1000mm Length
|
3
|
$257.52
|
|
10 (A/F) x 1000mm Length
|
5
|
$366.11
|
|
10 (A/F) x 2000mm Length
|
1
|
$182.65
|
|
10 (A/F) x 2000mm Length
|
3
|
$425.12
|
|
10.0 dia x 500mm long
|
1
|
£65.00
|
|
10.0 dia x 500mm long
|
2
|
£94.00
|
|
10.0 dia x 500mm long
|
3
|
£128.00
|
|
10.0 dia x 500mm long
|
4
|
£154.00
|
|
10.0 dia x 500mm long
|
5
|
£176.00
|
|
10.0 dia x 1000mm long
|
1
|
£81.00
|
|
10.0 dia x 1000mm long
|
2
|
£129.00
|
|
10.0 dia x 1000mm long
|
5
|
£265.00
|
|
10.0 dia x 2000mm long
|
1
|
£121.00
|
|
10.0 dia x 2000mm long
|
2
|
£202.00
|
Please note this is an approx Alloy 20 UNS N08020 Rods Price in China. For final Alloy 20 Round Bar price list please Make an inquiry.
UNS N08020 inconel Hollow Bar
Alloy 20
Alloy 20 Threaded Bar
Alloy 20 Hexagonal Bar
Alloy 20 Round Bar
inconel Alloy 20 Half-Round Bar
Alloy 20 T-Bar
UNS N08020 inconel Rounds
Alloy 20 Square Bar
Alloy 20 Flat Bar
UNS N08020 inconel Rectangular Bar
Alloy 20 Rod
Alloy 20 Hex Bar
Alloy 20 Triangle Bar
inconel Alloy 20 Precision Ground Stock
Alloy 20 Precision Ground Bar
robust quality Alloy 20 Bar suppliers offer various shapes such as Square Bar, Round Bar, Flat Bar, Hexagonal Bar, Hollow Bar & Channels
|
Type
|
SIZES (mm)
|
ISO Tolerance
|
SIZES (Inches)
|
|---|---|---|---|
|
Peeled and Polished
|
40.00 to 150.00
|
h11-DIN 1013
|
1.50″ to 6.00″
|
|
Cold Drawn and Ground
|
10.00 to 75.00
|
h9-h8-h11-h10
|
5/6″ to 2.50″
|
|
Cold Drawn and Polish
|
3.00 to 75.00
|
h9-h8-h11-h10
|
1/8″ to 3.00″
|
|
Peeled and Ground
|
20.00 to 50.00
|
h10-h9-h11
|
3/4″ to 2.00″
|
Cut to size on request (tolerance +2/-0 mm). Standard lengths of Alloy 20 Bars 2000 mm up to 6000 mm available
|
50.0
|
6.0
|
|
65.0
|
9.0
|
|
55.0
|
7.0
|
|
45.0
|
5.0
|
|
70.0
|
10.0
|
|
60.0
|
8.0
|
|
75.0
|
12.0
|
|
90.0
|
20.0
|
|
80.0
|
16.0
|
|
130.0
|
30.0
|
|
100.0
|
25.0
|
|
160.0
|
35.0
|
|
120.0
|
40.0
|
- SW 24 Alloy 20 Hex Rod
- SW 17 Alloy 20 Hex Rod
- SW 13 Alloy 20 Hex Rod
- SW 19 Alloy 20 Hex Rod
- SW 27 Alloy 20 Hex Rod
High Temperature Fasteners Inc. is China’s largest stockist and supplier of Alloy 20 Bar with an extensive inventory for commercial and industrial applications.
|
Grade
|
Cr
|
Mn
|
C
|
Si
|
S
|
Cu
|
Mo
|
Fe
|
Ni
|
|---|---|---|---|---|---|---|---|---|---|
|
Alloy 20
|
19 – 21
|
1.0-2.0
|
0.02 max
|
0.7 max
|
0.005 max
|
3.0-4.0
|
2.0-3.0
|
bal
|
32 – 38
|
|
Density
|
Elongation
|
Tensile Strength
|
Melting Point
|
Yield Strength (0.2%Offset)
|
|---|---|---|---|---|
|
8.1 g/cm3
|
30 %
|
Psi – 80000 , MPa – 551
|
1443 °C (2430 °F)
|
Psi – 35000 , MPa – 241
|
|
STANDARD
|
EN
|
UNS
|
WERKSTOFF NR.
|
AFNOR
|
|---|---|---|---|---|
|
Alloy 20
|
NiCr20CuMo
|
N08020
|
2.4660
|
Z2NCUD31-20AZ
|
Explore our inventory of Carpenter 20 Material Bar, Incoloy Alloy 20 Bar in China for great deals
| Alloy 20 Rectangular Bar | Nickel Alloy 20 Rectangular Bars |
| ASTM B473 Nickel Alloy 20 Bright Bar | Alloy 20 Hex Bar |
| Nickel Alloy 20 Hexagonal Bar | Nickel Alloy 20 Hex Bar |
| Alloy 20 Flat Bar | Nickel Alloy 20 Flat Bars |
| UNS N08020 Inconel Hexagonal Bar | ASTM B473 Nickel Alloy 20 Hex Bar |
| Alloy 20 Bright Bar | Inconel Alloy 20 Bright Bar |
| Alloy 20 Square Bar | Nickel Alloy 20 Square Bars |
| UNS N08020 Inconel Bright Bar | WERKSTOFF NR. 2.4660 Bright Bar |
| Nickel Alloy 20 Square Bar | UNS N08020 Inconel Square Bar |
| WERKSTOFF NR. 2.4660 Square Bar | ASTM B473 Nickel Alloy 20 Square Bars |
| Nickel Alloy 20 Rectangular Bar | UNS N08020 Inconel Rectangular Bars |
| WERKSTOFF NR. 2.4660 Rectangular Bar | ASTM B473 Nickel Alloy 20 Rectangular Bar |
| Alloy 20 Shaft | UNS N08020 Inconel Forged Rod |
| Alloy 20 Polished Bar | Nickel Alloy 20 Polished Bars |
| WERKSTOFF NR. 2.4660 Threaded Bar | ASTM B473 Nickel Alloy 20 Forged Bar |
| Nickel Alloy 20 Polished Bar | UNS N08020 Inconel Polished Bars |
| WERKSTOFF NR. 2.4660 Polished Bar | ASTM B473 Nickel Alloy 20 Polished Bar |
| Alloy 20 Threaded Bar | Nickel Alloy 20 Threaded Bars |
| WERKSTOFF NR. 2.4660 Flat Bars | ASTM B473 Nickel Alloy 20 Flat Bars |
| Nickel Alloy 20 Threaded Bar | UNS N08020 Inconel Threaded Bar |
| Alloy 20 T-Bar | Nickel Alloy 20 T-Bar |
| Nickel Alloy 20 T-Bar | UNS N08020 Inconel T-Bar |
| ASTM B473 Nickel Alloy 20 T-Bar | Alloy 20 Hollow Bar |
| Nickel Alloy 20 Hollow Bar | Nickel Alloy 20 Hollow Bar |
| UNS N08020 Inconel Hollow Bar | ASTM B473 Nickel Alloy 20 Hollow Bar |
| Alloy 20 Precision Ground Stock | Nickel Alloy 20 Precision Ground Stock |
| Nickel Alloy 20 Precision Ground Stock | UNS N08020 Inconel Precision Ground Stock |
| ASTM B473 Nickel Alloy 20 Rounds | Alloy 20 Half-Round Bar |
| ASTM B473 Nickel Alloy 20 Precision Ground Stock | Alloy 20 Rod |
| UNS N08020 Inconel Rod | ASTM B473 Nickel Alloy 20 Rod |
| UNS N08020 Inconel Half-Round Bar | ASTM B473 Nickel Alloy 20 Half-Round Bar |
| Alloy 20 Rounds | Nickel Alloy 20 Rounds |
| Nickel Alloy 20 Rod | Nickel Alloy 20 Rod |
| ASTM B473 Nickel Alloy 20 Precision Ground Bar | Alloy 20 Triangle bar |
| UNS N08020 Round Bars | Alloy 20 Bars |
| Alloy 20 Round Bars | Alloy 20 Rods |
| ASTM B 473 Alloy 20 Round Bars | ASME SB 473 Alloy 20 Rods |
| Nickel Alloy 20 Rounds | UNS N08020 Inconel Rounds |
| Nickel Alloy 20 Half-Round Bar | Nickel Alloy 20 Half-Round Bar |
| UNS N08020 Inconel Triangle bar | ASTM B473 Nickel Alloy 20 Triangle bar |
| Alloy 20 Precision Ground Bar | Nickel Alloy 20 Precision Ground Bar |
| Nickel Alloy 20 Precision Ground Bar | UNS N08020 Inconel Precision Ground Bar |
| Nickel Alloy 20 Triangle bar | Nickel Alloy 20 Triangle bar |
Take a look at our large inventory of Alloy 20 Cold (bright) drawn, hot rolled, centreless ground, peeled, smooth turned, hot rolled annealed round bars, slit rolled edge in China.