UNS K03011 Rod exporter in China
Ready stock of ASME SA350 Gr. lf2 class 1 Flat Bar in 3mm Thickness x 25mm Width
ASTM A350 Grade Lf2 Carbon Steel Round Bar
UNS K03011 Rod
ASME SA350 Gr. lf2 class 1 Flat Bar
Check live price of DIN 1.0508 Hot Rolled & cold rolled bar, wide stock of LF2 Carbon Steel Hex Bar & Square Bar Ex Shenzhen
Alloy steel and carbon steel products that are to be used for low temperature settings are produced using specification astm a350. The melting processes used by lf2 Carbon Steel Rectangular bar manufacturers includes any of the following techniques i.e. open hearth melting, basic oxygen melting, electric furnace or vacuum-induction melting. Along with being forged, the ASTM A350 LF2 Carbon Steel Round Bar is required to undergo certain heat treatment procedures.
Usually, the heat treatment practised on the astm a350 lf2 round bar includes tempering, normalizing, quenching as well as precipitation. The specification also includes a list of several tests and analysis to be performed on the alloy. The use of a heat and product analysis conducted on the ASTM A350 Carbon Steel Round Bar is to confirm if the product meets the requirement of the specification. Mechanical parameters of the said alloy are also checked under this specification.
As typical of many ASTM specifications, the astm a350 gr. lf2 class 1 square bar is mandatory for manufacturers to check properties such as its tensile and yield strength in addition to the elongation properties. Moreover, the chemistry of LTCS A350 LF2 Threaded Bar must contain elements in the specified requirements.
| Specifications | ASTM A350, ASME SA350 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Flat Bars |
1/2” to 10” in thickness range of 2mm to 150mm, |
| Hex Bars | AF5.8mm–17mm |
| Round Bars |
3.0 – 50.8 mm, Over 50.8 – 300mm |
| Rectangular Bars |
6.35 x 12.7mm,6.35 x 25.4mm,12.7 x 25.4mm |
| Square Bars |
AF2mm – 14mm, AF6.35mm,9.5mm,12.7mm, 15.98mm,19.0mm, 25.4mm |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
| STANDARD | UNS | WERKSTOFF NR. |
| ASTM A350 LF2 | K03011 | 1.0508 |
| Grade | C | Ni | Si | S | Mn | P | |
| ASTM A350 LF2 | min. | – | – | 0.17 | – | 0.6 | – |
| max. | 0.30 | 0.40 | 0.37 | 0.040 | 1.35 | 0.035 | |
| Grade | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (ksi) min | Hardness |
| ASTM A350 LF2 | 485 | 22 | 250 | 197 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
- Carbon Steel hex bar A350 LF2
US $1.5-4.5 / Kilogram - astm A350 LF2 Carbon Steel rods
US $2000-3000 / Ton - A350 LF2 Carbon Steel bars
US $1000-2500 / Ton - Carbon Steel A350 LF2 square bar
US $1550-2400 / Ton - ASTM A350 LF2 Carbon Steel round bar
US $1800-2300 / Ton
Why to pay extra when we provide LTCS A350 LF2 Forged and black Bar in exact sizes, Get free quote Now!
|
|
Manufacturer & supplier of lf2 Carbon Steel Cold drawn bar, ASTM A350 LF2 Carbon Steel Bright Bar and pump shaft in China
- Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
- Guarantee Letter
- Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
- NABL approved Laboratory Test Reports
- Form A for the purposes of the Generalized System of Preferences (GSP)
- Heat Treatment Charts
- Commercial Invoice which includes HS Code
- Packing List including net weight and gross weight, number of boxes, Marks and Numbers
- Quality Assurance Plan (QAP)
- Fumigation Certificates
- Raw Material Test Reports
- Test Certificates certifying NACE MR0103, NACE MR0175
- Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
- Material Traceability Records
- Flaring Test
- Intergranular Corrosion (IGC) Test
- Mechanical Testing Such as Tensile of Area
- Flattening Test
- Positive Material Identification – PMI Testing
- Chemical Analysis – Spectro Analysis
- Hardness Test
- Micro and MacroTest
- Pitting Resistance Test
- Raw Materials Certificate
- EN 10204/3.1B,
- 100% Radiography Test Report
- Third Party Inspection Report, etc