ss countersunk screws manufacturer in China, buy Stainless Steel Countersunk Machine Screws and Wood Screws at factory price
Stainless Steel Countersunk Screws
SS Countersunk Machine Screws
Stainless Steel Countersunk Wood Screws
check CSK screw dimensions, supplies a full range of M4 Stainless Steel Countersunk Coach Screws
A countersunk or as regularly shortened as CSK Screw is a fastener that is sunk into a piece of lumber. The heads of the Stainless Steel Countersunk Screws will sit below the surface of the material.
Following which, a wood plug or filler could easily fill or level up the depression created by these Stainless Steel Countersunk Machine Screws. Most ss countersunk screws manufacturer in China recommend using either bolts or large hex-head screws as countersunk fasteners. However, each of them would require a special countersink bit to achieve the optimum results. M4 Stainless Steel Countersunk Screws are one of the many techniques that could be used to join one piece of material to another.
Since these fasteners make a very strong, yet tight joint, Stainless Steel Countersunk Wood Screws are used in those areas where fasteners or joining techniques used are not considered to be practical. For instance, if you don’t want to have to fill a too many pocket holes, Self Tapping Countersunk Screws can be used instead. The hole of a Countersunk Coach Screws is much smaller and easier to fill. Stainless Steel Countersunk Concrete Screws also can be very useful in instances where one has to deal with burred holes. Although this is entirely dependent on the severity of the hole that has been burred. The 6mm Stainless Steel Countersunk Screws can readily act as a prepared seat for the head of the fastener.
|
Description
|
Qty
|
Price
|
|---|---|---|
|
M4 x 6mm
|
100 piece
|
£5.62 ex. vat
£6.74 inc. vat |
|
M4 x 8mm
|
100 piece
|
£5.22 ex. vat
£6.26 inc. vat |
|
M4 x 10mm
|
100 piece
|
£4.23 ex. vat
£5.08 inc. vat |
|
M4 x 12mm
|
100 piece
|
£5.14 ex. vat
£6.17 inc. vat |
|
M4 x 16mm
|
100 piece
|
£5.79 ex. vat
£6.95 inc. vat |
|
M4 x 20mm
|
100 piece
|
£6.93 ex. vat
£8.32 inc. vat |
|
M4 x 25mm
|
100 piece
|
£7.94 ex. vat
£9.53 inc. vat |
|
M4 x 30mm
|
100 piece
|
£8.83 ex. vat
£10.60 inc. vat |
|
M4 x 35mm
|
100 piece
|
£13.19 ex. vat
£15.83 inc. vat |
|
M4 x 40mm
|
100 piece
|
£11.75 ex. vat
£14.10 inc. vat |
|
M4 x 50mm
|
100 piece
|
£12.31 ex. vat
£14.77 inc. vat |
Offer a wide variety of CSK screw including Self Tapping And Self Drilling Countersunk Screws
| Grade | 18-8 Stainless Steel, 4.8, 8.8, A2, A4, A2-70; A4-70; A4-80 Countersunk Screws |
|---|---|
| Stainless Steel Screw standard | ISO 14583 |
| Stainless Steel counter sunk screws standard | ISO 10642 |
| British standards | BS 57 |
| Stainless Steel Countersunk Screws Size |
Stainless Steel Countersunk Screws M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes
|
| Length | 3 mm to 200 mm |
| Stainless Steel Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards |
| DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
| UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
| Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
| Tolerance | +/-0.01mm to +/-0.05mm |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Type | Pan/ Round/ Oval/ countersunk/ Truss head |
| Head | Pan head, flat head, oval head, hex head, phillips head |
| Finishing: | Zinc (yellow, white, blue, black), black oxide Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
| Finish | Per ASTM A380/A380M |
| Production process | Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
| Origin and service-region: | European Origin of Stainless Steel Countersunk Screws are Western European. However projects with eastern origin are possible on request. |
| Surface Coating: |
All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE. |
| Surface treatment |
|
| Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
| Stainless Steel Countersunk Screws Packing: | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Why choose us? |
|
| MOQ | 5 pieces |
| Test Certificate: |
|
| Free Samples | Yes |
| Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
| Payment Terms | T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
| Other available material |
|
| Uses & application | Railway, Wind tower, Nuclear power, Automotive industry, Construction, Electronic industry |
|
BS 450 Cheese Head Machine Screw
|
BS 450 Fillister Head Machine Screw
|
|
BS 450 Countersunk Head Machine Screw
|
BS 450 Flat Head Machine Screw
|
|
BS 450 Pan Head Machine Screw
|
BS 450 Truss Head Machine Screw
|
|
BS 1083 Hex Head Cap Screw
|
BS 1083 Socket Set Screw
|
|
BS 2470 Socket Head Cap Screw
|
BS 2470 Button Head Socket Cap Screw
|
|
BS 2470 Flat Head Socket Cap Screw
|
BS 2470 Flat Point Socket Set Screw
|
|
BS 2470 Cup Point Socket Set Screw
|
BS 2470 Knurled Cup Point Socket Set Screw
|
|
BS 2470 Cone Point Socket Set Screw
|
|
We maintain stock of Raised Countersunk Screws in China, Call Now For Stainless Steel Countersunk Tek Screws sample
- Raised Torx Countersunk Screws
- Pozi Raised Countersunk Screws
- Fine Pitch Socket Countersunk Screws
- Stainless Steel Countersunk Machine Screws
- Phillips Countersunk Screws
- Imperial Socket Countersunk Screws
- Raised Slotted Countersunk Screws
- Raised Phillips Countersunk Screws
- Metric Socket Countersunk Screws
- Torx Countersunk Screws
- Pozi Countersunk Screws
- Slotted Countersunk Screws
We are Manufacturer of wide range Black Japanned Countersunk Screws, 6mm Stainless Steel Countersunk Concrete Screws
- ISO 7089 Weight Chart (Plain Washer)
- ISO 4014 Weight Chart (Hexagon Head Bolt And Screw)
- ISO 4762 Weight Chart (Hexagon Socket Head Cap Screw)
- ISO 14583 Weight (Thread Forming Screw)
- DIN 938 Stud Dimensions (Stud And Stud Bolt)
- DIN 976 B Specification (Stud And Stud Bolt)
- ISO 4032 Weight Chart (Hexagon Nut)
- ISO 10642 Weight (Countersunk Screw)
You can find out the csk screw dimensions by clicking the link given here.
Hexagon Socket Countersunk Head Screws| EN ISO 10642 (DIN 7991) Grade 10.9
