Stainless Steel Lock Nuts are very useful to both engineers as well as mechanics. When one looks closely at the 316 stainless steel nylon insert lock nut he/ she is able to see a nylon sleeve or what is referred to as an insert.
check stainless steel lock nuts dimensions, m5 stainless steel lock nuts metric, Stainless Steel Nylon Lock Nuts manufacturers in india
Stainless Steel Lock Nuts
SS Nylon Lock Nuts
m5 stainless steel lock nuts metric
buy m6 stainless steel lock nuts, stainless steel bearing lock nuts, Cone Lock Nuts and self locking nuts from largest suppliers
Once the 1/4 stainless steel nylon lock nut has been tightened, the threads present on the shaft or the axle will cut into the nylon. These threads piercing into the Stainless Steel Nylon Lock Nuts is what holds it firmly in place. In fact, this is precisely what is required to prevent loosening of the Stainless Steel Metric Lock Nuts, due to the occurrence of friction and vibration when the wheel rotates.
Cone 18-8 stainless steel lock nuts are produced with a cone shaped top, which could be distorted after tapping in order to create a prevailing torque. The Stainless Steel Cone Lock Nuts are Less reusable in comparison to nylon insert. However, this type of lock nuts tends to be less susceptible to high temperature applications. Stainless Steel Flange Lock Nuts are hex shaped nuts with a circular shaped bottom flange which is larger than the hex section at the top.
Similar to flange lock nuts, Stainless Steel Stover Lock Nuts are a single piece fastener produced with a conical top with all-metal prevailing torque and a flat bottom bearing surface with chamfered corners. The locking action, created by distortion of the top threads of the stover 1/4-20 stainless steel lock nuts, has the ability to withstand not only severe vibration but also shock loads.
|
3/8″-16 Grade 2 Zinc Finish NE Steel Nylon Insert Lock Nut
|
$8.14 / package Unit Price: $0.1628 / each Units / package: 50
|
|
1/4″-20 Grade 2 Zinc Finish NE Steel Nylon Insert Lock Nut
|
$8.48 / package Unit Price: $0.0848 / each Units / package: 100
|
|
1/2″-13 Grade 2 Zinc Finish NE Steel Nylon Insert Lock Nut
|
$9.3625 / package Unit Price: $0.3745 / each Units / package: 25
|
|
1/2″-13 Grade 8 Yellow Zinc Finish NE Steel Nylon Insert Lock Nut
|
$16.145 / package Unit Price: $0.6458 / each Units / package: 25
|
|
5/8″-11 Grade 8 Yellow Zinc Finish NE Steel Nylon Insert Lock Nut
|
$11.70 / package Unit Price: $1.17 / each Units / package: 10
|
|
5/16″-18 Grade 2 Zinc Finish NE Steel Nylon Insert Lock Nut
|
$10.42 / package Unit Price: $0.1042 / each Units / package: 100
|
Please note this is an approx Cost of thomas & betts stainless steel lock nuts in China. For final m6 stainless steel lock nuts price list please mail us.
held wide stock of Stainless Steel Stover Lock Nuts, Flange Lock Nuts, electrical lock nuts and sealing lock nut at our warehouse
| Grade | 18-8 Stainless Steel, 4.8, 8.8, A2, A4, A2-70; A4-70; A4-80 Lock Nuts |
|---|---|
| DIN standard | DIN 934, DIN 982, DIN 985, DIN 936, DIN 929, DIN 1587, DIN 439, DIN 315 |
| British standards | BS 57 |
| Stainless Steel Lock Nuts Size |
Stainless Steel Lock Nuts M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes |
| Length | 3 mm to 200 mm |
| Stainless Steel Threads: | Metric, Metric Fine, BSW, UNF, UNC, BA, BSF and BSCY (cycle) threads or as required |
| Standard: |
DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards |
| DIN Standard | B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985 |
| UTS – Unified Thread Standard | UNC, UNF, UNEF, UNS, NPT, NPTF |
| Dimensions | ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded. |
| Tolerance | +/-0.01mm to +/-0.05mm |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| Type | Pan/ Round/ Oval/ countersunk/ Truss head |
| Head | Pan head, flat head, oval head, hex head, phillips head |
| Finishing: | Zinc (yellow, white, blue, black), black oxide Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET |
| Finish | Per ASTM A380/A380M |
| Production process | Wire DraLock, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing |
| Origin and service-region: | European Origin of Stainless Steel Lock Nuts are Western European. However projects with eastern origin are possible on request. |
| Surface Coating: |
All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE. |
| Surface treatment |
|
| Top Manufacturers | SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc. |
| Stainless Steel Lock Nuts Packing: | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Why choose us? |
|
| MOQ | 5 pieces |
| Test Certificate: |
|
| Free Samples | Yes |
| Delivery time | Regular product is about 7-15 days, custom product will according to special requirement |
| Payment Terms | T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping |
| Other available material |
|
| Uses & application | Railway, Wind tower, Nuclear power, Automotive industry, Construction, Electronic industry |
|
BS 1083 Thin Hex Jam Nut
|
BS 1083 Hex Nut
|
|
BS 1083 Full Hex Nut
|
BS 1083 Hex Locking Nut with Nylon Insert (Type T)
|
|
BS 1083 Hex Locking Nut with Nylon Insert (Type P)
|
|
Oldest 316 stainless steel nylon insert lock nut, ss lock nuts, stainless steel conduit lock nuts and wheel lock nuts, skf stainless steel lock nut exporter
- ISO 7089 Weight Chart (Plain Washer)
- ISO 4014 Weight Chart (Hexagon Head Bolt And Screw)
- ISO 4762 Weight Chart (Hexagon Socket Head Cap Screw)
- ISO 14583 Weight (Thread Forming Screw)
- DIN 938 Stud Dimensions (Stud And Stud Bolt)
- DIN 976 B Specification (Stud And Stud Bolt)
- ISO 4032 Weight Chart (Hexagon Nut)
- ISO 10642 Weight (Countersunk Screw)
Are you looking for 18-8, 1/4-20 and 5/16 stainless steel lock nuts, 1/4 stainless steel nylon lock nut, Stainless Steel Metric Lock Nuts, and top lock nuts Suppliers?
|
|